-
Cables and Connectors
Climate Control Solutions
Ariel Technology Inc. is a leading manufacturer of climate control and ventilation solutions for Control Panels and Electrical Enclosures in their state-of-the-art design, engineering, manufacturing & assembly hub. They proudly manufacture the highest quality climate control solutions and have over 25 years of combined climate control engineering and design experience and expertise.
Products include:
- Thermostats
- Hygrostats
- Fan & Exhaust Filters
- Heaters
- Thermoelectric Cooling Units
- Axial Fans
Arieltech Products
Thermostats
The TTEC series are thermostat controllers used to regulate the temperature inside industrial control panels or cabinets and control cabinet accessories. The TTEC series, bimetallic thermostats, control fans, heaters, and switch loads. TTEC-100 and TTEC-200 are identical except the TTEC-100 is Normally Closed which opens at temperature rise, the TTEC-200 is Normally Open which closes at temperature rise.
- CSA, CSAus, UL, cUL, and CE Certified
- Controls a wide range of enclosure temperatures from 14 °F to 176 °F
- Both are available in Fahrenheit or Celsius
- Mechanical NC and NO Thermostats
- Flame retardant housing, UL 94‐V0
- Multi-Door Type 12 and Type 4 Enclosures
- Mountable on three different sized DIN Rails (DIN Rail 35 mm, DIN Rail 32 mm, and DIN Rail 15 mm)
Hygrostats
The HYTEC-100 is designed to control the relative humidity inside of enclosures and electrical panels.The HYTEC-100 starts the heater in order to avoid formation of condensation in enclosures designed to protect electronic circuits, preventing the absorption of moisture by electrical andelectronic components inside of the enclosure.
- CSA, CSAus, UL, cUL, and CE Certified
- Controls a wide range of enclosure relative humidity from 10% to 90%
- Can be used for both applications; Humidifiers and Dehumidifiers
- Mechanical Hygrostat
- Mountable on 35 mm DIN Rail
- Flame retardant housing, UL 94‐V0
Fan Filters
TTEC series Filters & Fan/Filters are designed to supply forced convection filtered air to enclosures and electrical panels. By using the unique filtering and cooling features, FTEC series will cool down the inside of enclosures to a desired temperature above ambient temperature, protecting electrical and electronic parts against both heat and condensation.
- UL Listed NEMA Type 3R for Outdoor application, No hood required.
- UL Listed NEMA Type 12 for Indoor application
- Snaps into place without using any screws
- Airflow from 12 CFM to 450 CFM – 20 m³/hr to 750 m³/hr
- Operating Temperature -20 °C to +70 °C
- Storage Temperature -20 °C to +70 °C
- Standard colors are RAL 7035 light grey and RAL 7032 dark grey
Axial Fan Series
- Wide range of operating temperatures fromd -20 C/68 F to 70 C/158 F
- Fans are available in 115 and 230 VAC, 50/60 HZ
- Airflow from 40 to 1200 m3/hr
- Thermally or Impedance Protected
- Installs vertically or horizontally. Can be installed on any plate thickness by means of screws
- UL, cUL, and CE Approved
- 50,000 hrs life cycle
- Aluminium Die Cast housting
- Terminal Termination
Radiant Heater Series
- CSA, CSAus, UL, cUL, and CE Certified
-
Provides protection from condensation and low termperatures in Control Panels, Electronic Enclosures, Hydraulic and Pneumatic Machinery.
- Safe, Reliable and consistent heat for long periods by means of PTC (Positive Termperature Coefficient) heater.
- Highly efficient and low profile
- Connects easily with push connectors for 3 wires. From AWG 20 to AWG 16(0.5 - 1.5 mm).
- Built in safety feature prevents overheating
- Used with Normally Closed Thermostat and Hygrostat.
- Black anodized aluminum housing.
- Mounts easily on 35 mm DIN rail EN SO 022.
- Available in 30 Watt to 150 Watt.
- CSA, CSAus, UL, cUL, and CE Certified
- Provides protection from condensation and low termperatures in Control Panels, Electronic Enclosures, Hydraulic and Pneumatic Machinery.
- Safe, Reliable and consistent heat for long periods by means of PTC (Positive Termperature Coefficient) heater.
- Highly efficient and low profile
- Connects easily with push connectors for 3 wires. From AWG 20 to AWG 16(0.5 - 1.5 mm).
- Built in safety feature prevents overheating
- Used with Normally Closed Thermostat and Hygrostat.
- Black anodized aluminum housing.
- Mounts easily on 35 mm DIN rail EN SO 022.
- Available in 30 Watt to 150 Watt.